Heated sample tube
Application
Application in extractive sampling systems for cold spots and condensation of the sample to avoid.
Condensation with dust quickly leads to blockage of the gassonde and incorrect displays. This is also by using this approach avoid probe.
An extra filter can be mounted to the probe approach, recommended by dust loads greater than 10 g / m³.
Description
This approach comes in 3 standard probe lengths: 0.5, 1 and 1.5 meters (other lengths on request).
Optional is a 2-way Modbus / RS485 communication protocol that all possible signals of all installed controllers combines Ankersmid.
Serie type AST |
AST05x |
AST10x |
AST15x |
AST20x |
Temperature Sensor |
TC Fe-CuNi
|
TC Fe-CuNi |
TC Fe-CuNi |
TC Fe-CuNi |
Temperature Controller |
* |
* |
* |
* |
Length Probe |
500mm |
1000mm |
1500mm |
2000mm |
Maximum Temperature Sampling |
500°C |
500°C |
450°C |
450°C |
Operating Temperature Up |
200°C |
200°C |
200°C |
200°C |
Sample Gas Input |
G3/4 |
G3/4 |
G3/4 |
G3/4 |
Dust Loading |
Max 2g/m3 |
Max 2g/m3 |
Max2g/m3 |
Max 2g/m3 |
Probe Volume of the Tube |
200ml/m |
200ml/m |
200ml/m |
200ml/m |
Sample Presure Max Ambient
|
5 bar g -20°C to 70°C |
5 bar g -20°C to 70°C |
5 bar g -20°C to 70°C |
5 bar g -20°C to 70°C |
Power Supply
|
230 VAC 500 W 115 VAC 500 W |
230 VAC 800 W 115 VAC 800 W |
2300 VAC 1200 W 115 VAC 1200 W |
2300 VAC 1500 W 115 VAC 1500 W |
Electrical Standard |
EN 61010 |
EN 60519-1 |
EN 61010 |
EN 60519-1 |
Degree of Protection |
IP54 |
EN 60529 |
IP54 |
EN 60529 |
Mounting Flange |
DN65 |
PN6 |
|
|
Material of parts in contact with the system |
Stainless Steel 316 |
Stainless Steel 316 |
|
|
* Temperature controller Microprocessor temperature controller with alarm (optional RS485 or Modbus)
Documentation
Sample Tubes